Bolt 4K MAX is the most reliable, highest performance wireless video system we’ve ever created. Featuring exclusive technology found only in this model, the MAX is designed to be your mission critical wireless workhorse.
Transmit up to an 5,000 ft line of sight with the next-generation Array 4K Panel Antenna.
Fixed Frequency Mode locks onto your designated 5GHz channel for enhanced performance in challenging RF environments.
A unique antenna design provides a clearer wireless signal with faster reconnection times over long distances. (10-2119-G) – Sematron Italia official Teradek distributor – Sematron Italia distributore ufficiale Teradek
Bolt 4K MAX Wireless TX/RX Set – Gold Mount / TX RX Set – 10-2119-G
Includes: 1 TX & 1 RX
Video: Up to 4K60FPS
Range: up to 3000 ft.
Inputs: 12G-SDI, HDMI 2.0
Outputs: 12G-SDI, HDMI 2.0
Multicast: Up to 6 RXs
Compatibility: Bolt 4K 750, Bolt 4K 1500
Brand
Teradek

Weight | 10 kg |
---|---|
In the box | 1 x Bolt MAX 12G-SDI/HDMI Wireless TX Gold Mount 1 x Bolt MAX 12G-SDI/HDMI Wireless RX Gold Mount 1 x Bolt 4K TX Mounting Bracket 1 x Lightstand Adapter 3/8in 1 x Hot Shoe Adaptor 4 x Screw FlatHead Phillips Black Oxide 18-8 S S 0-80 x 1/8in 2 x Screw Socket Cap A S, M3 x 16mm 1 x Hex L key 2.5mm size 3-5/8" length 2 x 2pin Conn. to PowerTap – 18in Cable 1 x (Bit 718) 2pin Conn. to 2pin Conn. (Alexa) 18in Cable 1 x USB Male Type A (Full) – USB Male Type B (Micro) -3ft Cable 2 x Ultra Thin HDMI Male Type A (Full) – HDMI Male Type A (Full) 18in Cable 2 x SDI 12G BNC to BNC Cable Length: 18in / 46cm 1 x Teradek Case XL – Bolt 4K TX/4RX and Antenna Array 1 x PSU 2pin Conn. to 30W AC Adapter (Int) – 6ft Cable 9 x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna) 1 x Teradek Standard Terms and Conditions 1 x Insert – Product Register 1 x Insert – Bolt 4K A/C Adapter Requirements 1 x Quickstart Guide – Bolt 4K Max 1 x Wooden Camera – Ultra Arm Monitor Mount (1/4-20 to 3/8-16, 5in) |
Specs | Technical Specifications: Bolt 4K MAX TX Gold Mount ———— #Video – Video Inputs : 1 x 12G-SDI SMPTE 2082-1 standard / 75 Ω (accepts 12G-SDI, 6G-SDI, or 3G-SDI) 1 x HDMI Type-A receptacle accepts HDMI 2.0 or HDMI 1.4) – Sdi Compliance : N/A – Video Outputs : 1 x Loopout 12G-SDI SMPTE 2082-1 standard / 75 Ω – Sdi Ancillary Data Support : Supports transmitting metadata, timecode, and start/stop flags from most camera manufacturers. – Color Sampling : SDI: YCbCr 4:2:2, 10-bit/ HDMI: RGB 4:4:4, 8-bit – Input Cross Conversion : Yes, HDMI to SDI – Delay Tx To Rx : <0.001sec #Bonding – Bonding : N/A #Supported Resolutions – Supported Resolutions : 4Kp23.98/24/25/29.97/30/50/59.94/60 1080p23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60 480p50 576p59.94/60 480i(NTSC)/576i(PAL) #Video Processing – Video Compression : Visually Lossless – Supported Video Bitrate : N/A – Supported Video Bitrate Details : N/A – Supported Output Resolutions169 : N/A – Test Pattern Generator Support : N/A – Video Format Conversion Support : Connect an HD source to the Tx and get a 4K signal out of Rx Connect a 4K source to the Tx, get HD resolution out of Rx You can also mix & match from a single source: 4K signal into Tx can be 4K output from 1x Rx and HD output from a 2nd Rx Input/output configurations are controlled directly on units or via Bolt 4K app – Color Correction : None #Protocol Support – Network Protocols : N/A – Supported Video Transport Protocols : N/A – Remote Control : N/A – Software Or Platform Integration : N/A #Audio Processing – Audio Format : 48kHz 24-bit PCM – Supported Audio Bitrate Details : N/A #Inputs – Audio Input : Embedded SDI/HDMI Audio Input (2 Channel) #Outputs – Audio Output : N/A #Physical – Dimensions : 132 x 91 x 27 mm – Weight : Bolt 4K Tx without antennas (no battery plates) = 360g Bolt 4K Tx with 4x antennas (no battery plates) = 408g Bolt 4K Rx without antennas (no battery plates) = 440g Bolt 4K Rx with 5x antennas (no battery plates) = 496g Gold-Mount battery plate set (male+female) = +172g V-Mount battery plate set (male+female) = +220 g – Construction : Milled Aluminum(Chassis) and regulation-compliant PCB – Mountability : Multiple mounting options with 1/4", x20 and M3 holes #Interfaces – Http : N/A – Configuration Interfaces : OSD with Menu, Joystick Navigation – Switches : On/Off Switch – Recording Storage : N/A – Mobile App : N/A – Desktop App : N/A – Usb Interface Functionality : Upgrade via Micro-USB – External Control : N/A – Bluetooth : N/A #Network – Ethernet : N/A – Antennas : 4 External 2dBi RP-SMA antennas (included) – Wireless : Non-DFS Frequencies: 5.190 ~ 5.230 GHz and 5.755 ~ 5.795 GHz DFS Frequencies: 5.270 ~ 5.670 GHz – Number Of Channels : N/A – Channel Bandwidth : 13x 40MHz wide channels – Usb : N/A – Rf Channel Selection : Auto, Manual Manual available for non-DFS Channels – Encryption : AES-256, RSA-1024 key exchange – Rf Power : 19 dbm EIRP (4 external 2dBi antennas) (<80mW transmit power) – Rf Sensitivity : N/A – Range : Up to 1500 ft, line of sight – Unicast Multicast : Can connect one Transmitter to up to 6 Receivers – Noise Rejection : Can coexist with WiFi and 5GHz cordless phones Can operate up to 6 sets in same location #Power – Power Input : 2-Pin Circular locking Connector 7-28V DC – Power Output : N/A – Battery : None, optional Gold or V mount battery plate – Battery Runtime : N/A – Nominal Power Consumption : 20 Watts – Auxilary Power Input : N/A #Environmental – Operating Temperature : 0-40℃ – Humidity : N/A Bolt 4K MAX RX Gold Mount ———— #Video – Video Inputs : N/A – Sdi Compliance : N/A – Video Outputs : 2 x 12G-SDI SMPTE 2082-1 standard / 75 Ω (accepts 12G-SDI, 6G-SDI, or 3G-SDI) 1 x HDMI Type-A receptacle accepts HDMI 2.0 or HDMI 1.4) – Sdi Ancillary Data Support : Supports transmitting metadata, timecode, and start/stop flags from most camera manufacturers. – Color Sampling : SDI: YCbCr 4:2:2, 10-bit/ HDMI: RGB 4:4:4, 8-bit – Input Cross Conversion : Yes, HDMI to SDI – Delay Tx To Rx : <0.001sec #Bonding – Bonding : N/A #Supported Resolutions – Supported Resolutions : 4Kp23.98/24/25/29.97/30/50/59.94/60 1080p23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60 480p50 576p59.94/60 480i(NTSC)/576i(PAL) #Video Processing – Video Compression : Visually Lossless – Supported Video Bitrate : N/A – Supported Video Bitrate Details : N/A – Supported Output Resolutions169 : N/A – Test Pattern Generator Support : N/A – Video Format Conversion Support : Connect an HD source to the Tx and get a 4K signal out of Rx Connect a 4K source to the Tx, get HD resolution out of Rx You can also mix & match from a single source: 4K signal into Tx can be 4K output from 1x Rx and HD output from a 2nd Rx Input/output configurations are controlled directly on units or via Bolt 4K app – Color Correction : 17x17x17 3D LUT (supports 10-bit color) #Protocol Support – Network Protocols : N/A – Supported Video Transport Protocols : N/A – Remote Control : N/A – Software Or Platform Integration : N/A #Audio Processing – Audio Format : 48kHz 24-bit PCM – Supported Audio Bitrate Details : N/A #Inputs – Audio Input : N/A #Outputs – Audio Output : Embedded SDI/HDMI Audio Output (2 Channel) #Physical – Dimensions : 112 x 139 x 27 mm – Weight : Bolt 4K Tx without antennas (no battery plates) = 360g Bolt 4K Tx with 4x antennas (no battery plates) = 408g Bolt 4K Rx without antennas (no battery plates) = 440g Bolt 4K Rx with 5x antennas (no battery plates) = 496g Gold-Mount battery plate set (male+female) = +172g V-Mount battery plate set (male+female) = +220 g – Construction : Milled Aluminum(Chassis) and regulation-compliant PCB – Mountability : Multiple mounting options with 1/4", x20 and M3 holes #Interfaces – Http : N/A – Configuration Interfaces : OSD with Menu, Joystick Navigation – Switches : On/Off Switch – Recording Storage : N/A – Mobile App : N/A – Desktop App : N/A – Usb Interface Functionality : Upgrade via Micro-USB – External Control : N/A – Bluetooth : N/A #Network – Ethernet : N/A – Antennas : 5 External 2 dBi antennas (included) or optional Array Panel Antenna – Wireless : Non-DFS Frequencies: 5.190 ~ 5.230 GHz and 5.755 ~ 5.795 GHz DFS Frequencies: 5.270 ~ 5.670 GHz – Number Of Channels : N/A – Channel Bandwidth : 13x 40MHz wide channels – Usb : N/A – Rf Channel Selection : Auto, Manual Manual available for non-DFS Channels – Encryption : AES-256, RSA-1024 key exchange – Rf Power : 17 dbm EIRP (one external 2dBi antenna) (<51mW transmit power) – Rf Sensitivity : N/A – Range : Up to 1500 ft, line of sight – Unicast Multicast : Can connect one Transmitter to up to 6 Receivers – Noise Rejection : Can coexist with WiFi and 5GHz cordless phones Can operate up to 6 sets in same location #Power – Power Input : 2-Pin Circular locking Connector 6-28 VDC – Power Output : N/A – Battery : None, optional Gold or V mount battery plate – Battery Runtime : N/A – Nominal Power Consumption : 18 Watts – Auxilary Power Input : N/A #Environmental – Operating Temperature : 0-40℃ – Humidity : N/A |
UPC | 818264025796 |